Bandera Studio

Guitar → Spark PEDAL → USB-C → computer. Windows: install Positive Grid’s Spark PEDAL driver first. The pedal records its amp and effects on one input. Choose Input 1 for guitar.

Keep pedal tone clears Guitar EQ, low cut and trim, centers pan, and bypasses software effects. The pedal’s recorded effects cannot be removed later. Select your listening output in your computer’s Sound settings. Only one audio input device can be recorded at a time.

MIDI requires a USB-to-MIDI interface connected to the pedal’s MIDI IN using its included adapter. USB audio alone does not establish this MIDI connection. Chrome or Edge with Web MIDI support recommended. These controls send documented commands; hardware verification is pending.

Official USB setup / Windows driver · Official MIDI commands

With a two-input interface, choose Input 1 for your vocal mic and Input 2 for your guitar. Turn on Record on both tracks to capture them together. Some browsers expose only one input; use Input 1 for a normal microphone.

Use headphones when recording along with other tracks. Effects are added on playback, so you won’t hear your microphone coming back through the speakers.

Recordings start at the beginning of the song. Use a track’s Start time to line up imported audio. Start with 6 tracks plus MASTER. Add up to 16 tracks. Up to 1 hour per take. Long takes need desktop memory; keep this window open and save your song after each take.